Marubozu candle scann

rlabonville · August 2017

There is no predefined scann for a bullish Marubozu candle. Anyone as writen such a scan code?

markd · August 2017

On the Advanced Scan Workbench, in the Scan Builder section, is a drop down called "Candlestick Building Blocks". Open the drop down, select Marabozu and click "Insert".

To limit hits, you may want to add some other conditions from the Ticker Properties drop down, like exchange and/or market cap, depending on what you are interested in.

Possible exchanges are listed here

https://stockcharts.com/docs/doku.php?id=scans:reference:ticker_properties

A full syntax reference is here

https://stockcharts.com/docs/doku.php?id=scans:reference

Links to much more scanning info is here

https://stockcharts.com/docs/doku.php?id=scans

docuspec · August 2017

I have three scans I use daily:

White Closing Marubozu
and [Close = High]

Full White Marubozu
and [Open = Low]
and [Close = High]

White Opening Marubozu
and [Open = Low]

rlabonville · August 2017

Please define LONG BODY IS TRUE in the candlesticks scan blocks

markd · August 2017

I can't find an explanation in the documentation of how they programmed "long body".

However, here is an explanation of possible methods for programming "long body" by Greg Morris, who is a contributor to the site.

http://stockcharts.com/articles/dancing/2016/03/candlestick-analysis--pattern-identification.html?st=long+body

My guess is, they used method 3:

"An average of the body sizes of the last X days is used to determine a long body. The value for X should be anywhere between 5 and 10 days. If the percentage was set to 130, then a long day would be identified as if it was 30% greater than this average. This method is good because it falls in line with the general concept of candlesticks and their use for short term analysis."

Support might be able to tell you for sure.

Marubozu candle scann

Comments

Categories