market cap problem

theseus
theseus ✭
in Scanning
Good day,

My scanner worked fine before, except this week.

[country is US]
and [[[PctChange(80,close) > 15] or [PctChange(60,close) > 15]] and [Max(7,Close) < Max(60,Close)]]
and [market cap < 20000]

This is the main scanner. If I remove the market cap limit, the scan works fine. However, I want to limit the market cap of the stocks in my universe.

Anyone has any ideas? Thanks.

Comments

  • markd
    markd mod
    Seems to work fine as is. I re-arranged it for legibility. I think you had an extra pair of parens, which I removed.

    It gets 525 results after market close 3/16.

    [country is US]

    and [market cap < 20000]

    and [Max(7,Close) < Max(60,Close)]

    and

    [
    [PctChange(80,close) > 15]
    or
    [PctChange(60,close) > 15]
    ]

    But not all the results are stocks. I'm guessing if you want a market cap, you only want stocks. If so, this gets 351 hits. You could limit it further with a minimum market cap, too, e.g. and [market cap > 100] or whatever your lower limit is, if any. If you don't want OTC stocks, add and [ [exchange is NYSE] or [exchange is NASD] ]. With all conditions added (remove the //) , there are 43 results.


    [country is US]

    and [type is stock]
    and [group is not ETF]

    //and [ [exchange is NYSE] or [exchange is NASD] ]

    //and [market cap > 100]
    and [market cap < 20000]

    and [Max(7,Close) < Max(60,Close)]

    and

    [
    [PctChange(80,close) > 15]
    or
    [PctChange(60,close) > 15]
    ]

Categories