slow stoch cross over

lutra
lutra ✭
in Scanning
I am getting a syntax error when I put the 80.X before the stoch. It works when the 80 is after, but that shows me when the crossover comes from below. I would like to know when it reverses down.
and [SMA(20,close) > 9.00]
and [SMA(20,close) < 65.00]
and [today's sma(20,volume) > 500000]
and [Slow Stoch %D(5,1) X 80.0]
below the formula with syntax error:
[type = stock]
and [SMA(20,close) > 9.00]
and [SMA(20,close) < 65.00]
and [today's sma(20,volume) > 500000]
and [80.0XSlow Stoch %D(5,1)]
May I have some suggestions please?

Answers

  • markd
    markd mod
    edited May 2018
    I think you just need spaces around the "x" operator. This passes syntax and gets results, although I did not review the results.

    and [80.0 X Slow Stoch %D(5,1)]

Categories